The role of photovoltaic glass isolation paper

As we all know, glass products are fragile and not easy to separate. Protective measures must be taken during transportation. At this time, mildew liner has entered the glass packaging industry line of sight. Photovoltaic glass isolation paper is used as a glass-to-glass isolation material, which can prevent transportation during transportation. Scratches on the glass will also extend the storage time of the glass. The following sulfur-free paper manufacturers and dust-free printing paper manufacturers will explain the reasons for adding photovoltaic glass isolation paper to photovoltaic glass wooden cases.

Photovoltaic Glass Isolation Paper can effectively prevent damage caused by static electricity:
Sulfur-free paper manufacturers and dust-free printing paper manufacturers will show you the main sources of static electricity:
In the glass packaging process, the static electricity of the bottom paper mainly comes from internal generation and external introduction.

Internal electrostatic charge: When two or more solid materials with different characteristics rub or contact on a large area, electrons between objects will be transferred. In the process of laying photovoltaic glass isolation paper, the friction between the paper rotating with the roll paper, the friction between the photovoltaic glass isolation paper and the transfer roller of the laying machine, the friction between the glass and the rubber transfer roller, The friction between the wool clothes and the photovoltaic glass isolation paper, etc. will generate static electricity.
Introduce static charge from the outside: the process characteristics of the paper machine, apply static electricity to ensure that the paper is leveled.

Photovoltaic isolation paper The principle of storing static electricity:
When two objects of different materials are in close contact, an electric double layer will be formed on the contact part. For example, both objects are conductors. When two objects are separated, electrons can always easily pass through the separated contacts, despite the speed of separation. The dots all leak back to their original position, so they still appear electrically neutral after the photovoltaic separator is separated.
Sulfur-free paper manufacturers and dust-free printing paper manufacturers tell you that if two or more substances are insulators, there will be excess electrons on the separated objects. Rechargeable. The resistivity of the bottom paper is higher than 108W · cm, the resistivity is high, and the conductivity is poor. When it gets electrons, the photovoltaic isolation paper electrons are difficult to move on it, so static electricity is easier to accumulate.